R12K/400 (2MB L2) Octane, V6 graphics (32MB VRAM, 8MB TRAM), 512MB RAM, 8GB disk

1 400 MHZ IP30 Processor
CPU: MIPS R12000 Processor Chip Revision: 3.5
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 512 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3 serial port: tty1
IOC3 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V6
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1

Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1280x720 
        BUZZ version A.1
        PB&J version 1
        32MB memory
                Banks: 2, CAS latency: 3
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 720 lines, 72.00Hz (1280x720_72)

NOTE: this board does not support 1280x1024_72. The monitor I had
couldn't displau 1280x1024_96, so I had to use 1280x720_72 as the next
best thing.